Home Theater Direct RTD209 User Manual download pdf (Page 22)

Ripping to the USB device or the mp3 player are basically the same. Connect the USB device or

mp3 player first before ripping.

Note: CD Ripping function only supports CDDA discs.

Ripping CD to USB or mp3 Player

1. During CD playback, press REC on the remote to activate the Ripping Menu.

2. Select one of the menu itmes using the up/down arrow buttons. Press the left/right arrow

buttons or OK to change the setting.

Speed

High speed ripping mode can save time when ripping from CDs. Select 1x(normal speed) or

2x(double speed). Press the down arrow button to move to the next menu item.

Note: No sound will be heard during ripping if you select 2x.

Source

You can select to rip one track(TRACK), the whole disc(DISC) or programed tracks(PROG TRACK).

Press OK to confirm selection. Press the down arrow button to move to the next menu item.

Destination

Select the destination of the ripped files. You can select to rip the files to the mp3 player (the Lyra

mp3 Player) or your USB device (USB).

Note: CD Ripping function does not support ripping files to Mulit Card Reader via USB port.

Start Ripping CD

Highlight START and press OK to start ripping.

Note: “NO USB DEVICE” will be displayed if no USB device is connected

to the unit.

“NO PROGRAM TRACK” will be displayed if no program list is created.

“USB DEVICE IS FULL” will be displayed if the USB device is full.

“USB WRITE PROTECT” will be displayed if the USB device is write-

protected. You should switch off the write protection first.

The screen on the right appears when ripping start. The

first progress bar represents the progress percentage of

the current ripping track while the second progress bar

represents the total percentage. The percentage of both

bars will be identical if there is only one track to rip.

Note: You can select ripping speed even after ripping is started by pressing the left/right arrow buttons.

“DEVICE REMAIN” indicates the total remaining time of the Lyra mp3 Player or the USB device.

To stop ripping during the process, highlight STOP button and press OK.

When ripping has finished, press REC to quit the ripping menu.

File Names of Ripped Files

You can find the ripped files saved in a folder named “CDRECORD” with file name as “CDTKxx01”,

“CDTKxx02”...etc.

Deleting Files

In USB or mp3 player mode, select the unwanted files by

pressing the up/down arrow buttons. Press and hold CLEAR on

remote to delete files and select YES to confirm deletion.

Illustrations contained in this document are for representation only.

CD Ripping

SPEED: 1X DEVICE REMAIN

SOURCE: ALL TRACKS 02:14:31

DESTINATION: LYRA

TRACK06 01/02 01:23 50%

TOTAL 25%

CD RIPPING MENU

STOP

008

[

]

008

ARE YOU SURE YOU WANT

TO DELETE IT?

RETURN TO ORIGINAL

SETTING IN 10 SECONDS.

YES

RTD209 EN 26/4/06 3:21 PM Page 24

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 36 37

Comments to this Manuals

No comments

Home Theater Direct RTD209 User Manual Page 22

Comments to this Manuals